Simple(r) UV Strobe

I was digging the idea of strobing ultraviolet light throughout the haunt walkup. I asked about UV LED's on the Halloween-L and Grim Shady let me in on a cool idea. He had just designed a very flexible UV strobe circuit and posted it on his web site.   Grim was the first to create a circuit design for the strobes and his design has already been put to use in fellow haunts with great results.  (Check out Grim's original circuit design)  I decided I would give it a try:  See my first version of Grim Shady's UV strobe design After building the first one, I realized it would take me quite some time to get 10 of these built. So I started my quest for the Simple(r) UV Strobe:

I started with the LED Blinker kit from EKI ($4.00) and quickly mocked up a prototype on a bread board.  The EKI kit provides most of the components and the circuit board for you. I updated the schematic and noted the changes.
	EKI LED Blinker kit	My Prototype	The updated Schematic	parts list	Start building
Most of the new parts will fit into existing holes in the circuit board.  I didn't drill any new holes in the board, so I attached some components externally (as shown)
The LED housings.  Here are a couple of ideas of what I am driving with this circuit.

	Videos of the 'Strobe Eyes' in action	Eyes at Night	Eyes on the workbench